ここから本文です
TWO:Arthur consulted his common sense. "Can't you remember the place where you lost them," he suggested.
Classification by type of system
1natural circulation external heating pipe type
2natural circulation calandria type
3forced circulation type
4falling-film type
5rising film type
6jacket type
7coil type
Classification by method of operation
1single effect evaporator system
2multiple effect evaporator system
3auto-vapor mechanical compression system
4auto-vapor ejector compression system
5multistage flash system

After taking into consideration of the physical and chemical property of solutions, the desired design conditions, and available utilities, we select the most suitable type of system by utilizing our years of experience and excellent results.
In addition, we can offer designs and manufacturing services that take into careful consideration compactness, energy-efficiency, and automatization.

THREE:

While standard calandria type evaporation systems are widely used as the typical concentration evaporator by the various food and chemical industries, we have delivered many of those systems as finishing concentration evaporators especially for sugar solutions and starch syrups.

THREE: "Then it was ever so funny to see the men bowing to each other; they did it with so much dignity, as if they had all been princes, or something of the sort. They rest their hands on their knees, and then bend the body forward; and sometimes they bend so low that their backs are level[Pg 89] enough to set out a tea-service on and use them for a table. When they want to bid good-bye, they say 'Sayonara,' just as we say 'Good-bye,' and it means exactly the same thing. They are not satisfied with one bow, but keep on several times, until you begin to wonder when they will get through. Everybody says they are the politest people in the world, and I can readily believe it if what I have seen is a fair sample.
  • Enables flexible operation with little influence from variations in load and raw solution concentrations because of an adequate amount of solution being held within the system. These systems are also suitable for batch type burning evaporators.
  • Concentrations can be controlled within product specifications by the cascade control using the concentrations of concentrated solution and the raw solution supply and also by the arithmetic control of raw solution concentrations, etc. (Result for sugar solutions: 75±0.2wt%)
  • High-viscosity solutions and solutions that may crystallize can also be utilized by installing a propeller in the evaporator as a forced circulation system.
THREE:After the great fires of the last twenty years, the burned districts have been rebuilt of stone, or largely so; and precautions that were hitherto unknown are now taken for the prevention of fresh disasters. Some of the new quarters are quite substantial, but they resemble too strongly the edifices of a city in Europe to be characteristic of Japan.

This is a process example of a device that continuously and simultaneously concentrates two types of waste liquid with a single high-efficiency steam compressor.

THREE:The batsman at the other end was a stout, rather plethoric individual. He missed the first two balls, and the third struck him full in the stomach. There was a sympathetic pause whilst Mr. Bumpus, who was well known and respected in the town, rubbed this rather prominent part of his anatomy to the accompaniment of fish-like gaspings and excusable ejaculations. Mr. Bumpus was middle-aged and bald as well as corpulent, and although he did his best to endure the mishap with sportsman-like stoicism, the dismay written upon his perspiring features was certainly an excitant to mirth. Some of the fielders turned their heads for a few moments as though to spare themselves a difficult ordeal; but on the whole there was discreet silence.
  • By evaporating the steam using a mechanical compressor and reusing it, almost no heating steam is alomost required except the time of start-up, so large energy savings can be expected.
  • By combining with a thin film falling heat exchanger that does not raise the boiling point due to the liquid depth, it is possible to utilize the temperature difference of the compressor at the maximum.
  • Since the residence time and heating time are short and the holding amount is small, starting and stopping can be performed in a short time.
  • It will prevent scale adhesion in the can that the evaporator is divided into two parts, and that the supply of the undiluted solution is alternately switched over a fixed period of time to perform heat concentration.